| MC#7 Bore
Cleaner and Conditioner |
Go Back to Main
Tips and FAQ Page
Click on the links below to view more information.
FEATURED PRODUCT |
MC#7 Bore Cleaner
and Conditioner |
|
| starting at $6.99 |
|
free
shipping when you spend $35 |
QUESTION: I shoot corrosive, surplus military,
ammunition. Will MC#7 Bore Cleaner neutralize and remove corrosive salts?
ANSWER: Yes it will. You may also use Xtreme Clean or
Aqua Clean Bore Cleaner.
NOTE: A thorough cleaning of the bore and action within 24 hours, from the time
cleaning is complete, is recommended when corrosive ammunition is used. After
cleaning, we highly recommend a wet patch of rust prevent through the bore and a
spray coat of rust prevent to be applied in the action.
back to top
QUESTION: Does MC#7 Bore
Cleaner contain ammonia?
ANSWER: Yes, MC#7 does contain a small percentage of
ammonia. Our Xtreme Clean and
Aqua Clean Bore Cleaner are ammonia free.
back to top
QUESTION: Is MC#7 Bore Cleaner safe to use on chrome lined or stainless barrels?
ANSWER: Yes
back to top
QUESTION: How long can I leave MC#7 Bore Cleaner to soak?
ANSWER:
After your initial wet patching and bore brushing procedure to remove powder and
carbon fouling, 20 minutes is sufficient time for the bore cleaner to do its job
on copper and lead fouling.
back to top
QUESTION: On the label of your MC#7 Bore Cleaner, it
states, ‘do not leave in bore overnight’ why is that not recommended?
ANSWER:
Most bore cleaners contain water. If ideal heat and humidity conditions are
present, a slight chance of rusting is possible with some firearms.
back to top
FEATURED PRODUCT |
MC#7 Bore Cleaner
and Conditioner |
|
| starting at $6.99 |
|
free
shipping when you spend $35 |
QUESTION: I
have read that people will make up a 50/50 blend of MC#7 Bore Cleaner
and kroil
and allow it to soak in a bore overnight. My questions are: will this procedure
remove additional carbon and is it safe to leave the bore wet overnight?
ANSWER:
Yes. It is believed that, this blend you mentioned will penetrate and pull
carbon fouling from the pores of the steel. It is safe to leave it soak
overnight. Within 24 hours, or less, it will remove whatever carbon was present.
NOTE: It is necessary to clean the bore first with full strength
MC#7 Bore
Cleaner prior to using the 50/50 overnight blend.
back to top
QUESTION: I left my Shooter’s Choice
MC#7 Bore Cleaner exposed to freezing temperatures. Is the product still
ok to use?
ANSWER: Yes. Freezing temperatures will not harm the performance.
Just allow the MC#7 Bore Cleaner to warm up to room temperature, and then shake
the bottle well.
NOTE: All Shooter’s Choice gun care products should, when
possible, be stored at room temperature.
back to top |
