Robert Williams of Lithia Springs, GA - 01/04/2005
Best oil out there. Great on automatics. AR-15, pistols, etc. Very slick, doesn't seem to collect dirt, and very little needed.
Nick Pashun of Maywood, NJ - 05/01/2005
FP10 eats lead like no other. Forms a electrical chemical barrier that alters electrical polarity of the metal without change of tolerances. This is the only gun oil that I will use!
Dave Markowitz of Plymouth Mtg., PA - 03/14/2004
FP-10 is an excellent CLP. It is very slick, is a very good rust-preventative, and is a pretty good cleaner. It has a very faint smell; it's like cinnamon. In my opinion, it cleans, lubricates and protects better than Break Free CLP, which is pretty good stuff.
David Markowitz of Plymouth meeting, PA - 04/30/2004
FP-10 is an outstanding lubricant and preservative and a pretty good cleaner. I prefer it for lubricating my guns and also use it when I want to do just a quickie cleaning. FP-10 does do a better job of cleaning than Break Free CLP, in my experience.
Dave Minnich of Wernersville, PA - Date posted: 12/16/2008
This stuff is GREAT on my Glock and AR-15. Guns both operate smoothly through hundreds and hundreds of rounds with no need for re-lubrication. Even the AR!! Doesn't attract dirt, stays slick, and protects from rust. What more can you ask for from a gun oil? Buy this stuff and throw your CLP in the garbage can!
Doug Fletcher of Bartlett, TN - 01/05/2009
I've used FP-10 for 2 years now in a competition AR-15 (5000+ rounds). It's the best CLP I've used. No teflon or other particulates added, so it won't "gunk up" an action. I've never had a failure-to-fire or other problem associated with lubrication since I started using FP-10 and I can't say that about other CLPs. I've only used about 2.5 oz. in the gun with regular cleaning (about every 2 weeks).
Greg J. of Mars, PA - 09/15/2005
This is the best gun lubricant and cleaner I have ever used. Does not allow dust to collect on the surface and is a superior to Break-Free. I use it on all of my weapons and fishing gear. You need to only use a very little bit to get the job done and depending on your shooting habits a 4oz. Bottle of FP-10 will last a long time.
Richard Ishmael of Sapulpa, OK - 01/10/2006
You simply cannot beat this product. I have been using FP-10 for about fifteen years now, it was originally known as Firepower FP-10. Put it on your bore-brush or patch and saturate the bore. Let it set for about fifteen minutes and it will soak into the metal and remove more crud than you can imagine. When you think the bore is clean...set the weapon aside and run a clean patch thru it the next day. Then see for your own eyes just how good this stuff really is.
Was this review helpful?
Roger Balser of Payson, AZ - 12/31/2001
Very Durable. It is light and clear and does not rub off. It could use a plastic straw to reach the very hard to get at places. |
)
